• Electric Start motor 2 Box Model - 7.0 hp 3, 4, & 6 Box Models - Kohler 9.5 hp
 12 Volt Solenoid Operated Clutch • Folding Auger - 14'4" Discharge Height for Maximum Reach
• Switch Operation from End of Discharge Tube
• 3-Stage Telescoping Discharge Drop Tube with 19'9" Reach
• Lundell® Poly-Cupped Flighting for Gentle Seed Handling
• One Handle, All Box Positive Lock Down System
• Electric Brakes on Both Axles with Brake Away Safety Brakes
 Twin Torsion Axles • LED Tail, Turn & Brake Lights, 2 5 /16" Ball, and Safety Chains • Heavy Duty Superior® Gear Box on Lo-Profile Models

This Rowse 24 Wheel Ultimate w/kickers has all new brass and bushings and has been reconditioned by Rowse Rakes.

​All- aluminum construction 
Aluminum floor on I-beam crossmembers
All wheel electric brakes
Air flow head & neck in double-sided insulated stall divider w/spring loaded holdback
Collapsible rear tack w/saddle rack on moveable post (1) per horse
Dressing Room with Carpet, Bridle Hooks and Brush Box
LED Lighting -DOT approved
Body Width: 82.25" Inside Height 7'
Padded butt bar across rear opening
Premium camper door w/screen 32" x 72" (Driver side)
Rear Doors 60/40 Split w/18" x 24" windows
Rubber floor mats in horse area
Rubber bumper
Torsion axles (sized to weight of horses)
Tapered aluminum one-piece roof
White pre-painted .050 smooth aluminum exterior sheeting
Wiring extrusion cover
Wired for 110 volt
​

MEASURES
WIDTH: 5',6', 6'8"
LENGTH: 16' TO 28'
CAPACITY:              14,000 LBS.
G.V.W.R                   14,000 lb          
AXLES                       TWO 7,000 lb Cambered Axle w/elec. Brakes
G.A.W.R                   7,000 lb           
SUSPENSION         Torflex
COUPLER                2-5/16" Gooseneck Coupler (20,000 lb)
TIRE                         16'
WHEEL                    16" White Spoke 8 Bolt with Tire
SAFETY CHAINS    3/8" Grd. 70 w/safety Latch Hook (2 each)
JACK                        1) 10.000 lb Drop Leg Jack
NECK                        8" Channel Riser  & Neck
FLOOR                     2" Treated Pine Lumber Deck
FRAME                      11 Ga. Sheet Metal w/Angle Iron
LIGHTS                     D.O.T. Stop, Tail, Turn and Clearance
ELEC. PLUG              7-Way RV
CROSSMEMBERS    2" x 3" Tubing & Angle Iron 3/16" x 2"
SIDES                         6" Metal Slats
FINISH                       Mechanical and/or Chemical Pretreatment
(PREP.)                       For Maximum Paint Adhesion & One Coat of
                                    Primer 
FINISH                        Painted w/2 Coats Automotive Quality Acrylic Enamel
DIVISION GATE          1 Solid Gate 16 to 20' (see options)
                                      2 Solid Gates 24' to 28'   
REAR GATE                Full Swing with Half Slider
ESCAPE DOOR            36" Side Door (Left Side Standard)                               

OPTIONS
                          DESCRIPTION
Difference Between 2 Torflex Axles to 2 Drop Spring Axles (-) Subtract
Add one 10,000 lb Drop Leg Jack
Sides With 1" x 2" Tubing Instead of Metal Slats
High Sides Full or Parcial Length
46" Sides with 2-1/2 " Gap Above the Fender
Slant Tack Room in Front of Trailer
4' Straight Tack Room in Front Trailer
Cleated Rubber Floor
3/4" Rubber Mats on Top of Wood